Revision History AW00097603000
310 Basler aviator GigE
AW00097603000 23 Oct 2013 Modified note on availability of the auto functions when the cameras are
powered on or reset:
Section 7.5 on page 86
Section 10.2 on page 152 and
in all sub-sections of the "Auto Functions" section from page 171on).
Updated Figure 30 on page 97 "Exposure Start Controlled with an ExFSTrig
Signal".
Added Section 8.3 on page 113 (Color Enhancement Features).
Added the "White Balance Reset" sub-section on page 114 (White Balance
section).
Integrated the minimum output pulse width feature, see Section 10.8 on
page 188.
Integrated the sequencer feature, see Section 10.10 on page 192.
Added the "Error Codes" section, see 10.9 on page 190.
Added note on availability of the auto functions when the cameras are
powered on or reset (in all sub-sections of Section 10.7 on page 171).
Integrated that the balance white auto function can now also be operated in
the "continuous" mode of operation (Section 10.7.9 on page 186).
Added the gray value adjustment damping feature in Section 10.7.7 on
page 184. Added sentence concerning gray value adjustment damping in
Section "Using an Auto Function" on page 179.
Deleted the following entry in the pylon setup list "A variety of adapters for
third party software imaging processing libraries"
Added notes on the "full" camera description file in Section 2 on page 19,
Section 8.3.3 on page 117, Section 8.3.4 on page 121, and Section 10.10
on page 192.
Added note box in Section 10.2 on page 152.
Added the critical temperature condition in Section 10.18.2 on page 253.
Added the chunk Stride parameter in Section 11.2 on page 264.
Added the "Sequence Set Index" section on page 277.
Added the Save Feature... command on page 282 in Section 12.
Doc. ID Number Date Changes
To Next Page
Loading...
Need help?
General
