Basler GigE CAMERAS User Manual

I/O Control AW00097603000
50 Basler aviator GigE
Camera.LineSelector.SetValue( LineSelector_Out3 );
Camera.LineSource.SetValue( LineSource_TimerActive );
You can also use the Basler pylon Viewer application to easily set the parameters.
For more information about
 the pylon API and the pylon Viewer, see Section 3 on page 21.
 the acquisition trigger wait signal, see Section 7.7.3.1 on page 92.
 the frame trigger wait signal, see Section 7.7.3.2 on page 94.
 the exposure active signal, see Section 7.7.1 on page 90.
 working with a timer output signal, see Section 6.2.4 on page 53.
 setting the state of a user settable output line, see Section 6.2.2 on page 51.
 the electrical characteristics of the output lines, see Section 5.8 on page 41.

Basler GigE CAMERAS Specifications

General

Brand	Basler
Model	GigE CAMERAS
Category	Digital Camera
Language	English