Basler scout GigE User Manual

Revision History AW00011916000
354 Basler scout GigE
AW00011914000 14 Apr 2011 Integrated the scA1600-28gm/gc.
Updated European and U.S. phone numbers and U.S. contact address.
Indicated the availability of programming languages other than C++ for use
with pylon in Section 1.9 on page 37.
Added information about the relationship between the packet timeout and
the inter-packet delay in Section 4.1 on page 46, Section 4.2 on page 47,
and Section 5.1 on page 57.
Added information about the payload and non-payload portion of the packet
size in Section 5.1 on page 57.
Changed the maximum allowed current for an output circuit to 50 mA in
Section 7.7.2.2 on page 87.
Modified input line assignment to take account of standard and legacy
modes in image acquisition control in Section 8.1.1 on page 91.
Added the Acquisition Trigger Wait signal to Section 8.2.1 on page 93.
Re-wrote Section 9 on page 103 to describe acquisition start trigger and
frame start trigger and to take account of standard and legacy modes in
image acquisition control.
Indicated that the maximum possible frame rate can not be achieved with
the acquisition mode parameter set to single frame in Section 9.3 on
page 109, Section 9.13 on page 167, and Section 9.14 on page 171.
Updated the exposure start delay values and the frame readout time
formula in Section 9.12 on page 165.
Updated the C
2
, and C
3
constants, formula 1, and the calculated example
in Section 9.13 on page 167.
Updated the C
1
, C
2
, and C
3
constants, formula 1, and the calculated
example in Section 9.14 on page 171.
Indicated the applicability of the gain calculation procedure for the scA640-
120 and scA1300-32, corrected the dB gain values at max setting for the
scA640-120 and scA1300-32, and included a calculated example in
Section 12.1 on page 223.
Indicated the effect of the black level parameter setting for the scA640-120
in Section 12.2 on page 230.
Modified Section 12.13 on page 306 and Section 12.14 on page 308 to take
account of standard and legacy mode in image acquisition control.
Added events and parameter names in Section 12.15 on page 310, and
removed some descriptions for transfer to the "Camera Events" code
sample.
Rearranged sequence of sections 8 through 11.
Removed the feedback page.
Doc. ID Number Date Changes

Basler scout GigE Specifications

General

Brand	Basler
Model	scout GigE
Category	IP Camera
Language	English