2.4.3 Safety information regarding operation
Carry out the following measures to ensure safe operation:
•
Refrain from any working practices which may compromise safety.
•
Only operate the machine if all protection equipment and safety-related equip-
ment (e.g. detachable protection equipment, emergency stop equipment and
noise reduction devices) are present and functioning correctly.
•
In the event of malfunctions, stop and secure the machine immediately. Any
fault must be rectified or eliminated immediately.
•
Switch the machine on and off and manage indicator displays as stipulated in
the operating manual.
•
Before switching on / starting up the machine, make sure that there is no risk
of it harming anyone whilst in operation.
•
Adhere to the activities and dates for setting, maintenance and inspection as
stipulated in the manual, including specific information on replacing parts/
fitting components. These activities may only be carried out by specialist per-
sonnel.
•
Inform the operating personnel about the special tasks and service work be-
fore starting it. Nominate a supervisor.
2.4.4 Safety instructions regarding maintenance, service and repairs
Carry out the following measures for ensuring safe maintenance, service and repair
work:
•
For all work that affects the operation, adjustment of production capacities,
changeover or setting of the machine and its safety-relevant equipment and
inspection, maintenance and repair, observe the switching on and switching
off procedures in accordance with the operating instructions and instructions
for servicing work.
•
Service area to be made and secured as large as possible if required.
•
If the machine is switched off completely for maintenance and repair work,
you must ensure that it is secured against unexpectedly starting up: Lock the
main control systems and affix a warning sign to the main switch.
•
Begin maintenance/repair work by cleaning any oil, fuel or cleaning agents off
the machine; in particular, the connections and screw fittings. Do not use ag-
gressive cleaning agents. Use lint-free cleaning cloths.
•
During maintenance and repair work, any screw connections that have been
loosened must always be tightly screwed back in again.
•
Use suitable tools for all the work to be carried out.
•
If safety equipment needs to be removed for maintenance and repair purpo-
ses, it must be reattached and inspected as soon as the maintenance and re-
pair work is complete.
•
Make sure that auxiliary materials and replacement parts are disposed of safe-
ly and in an environmentally-friendly manner.
•
When working above head height you must use access equipment and working
platforms provided for the purpose or other safety-compliant equipment. Do
not use machine parts as access aids. When carrying out maintenance work at
higher levels you must wear fall arresting equipment.
2 | For your safety
OPERATING MANUAL
20/106
A_Compact-Line_002_en
10-10-2016
To Next Page