Bauer Compact-Line JUNIOR II-B - Lubrication Oil

9.3.4 Lubrication oil
Depending on the type of application of the unit, the following is demanded of the
lubrication oil that is used:
•
low residue formation
•
no carbon deposits in the valves
•
good corrosion protection
•
emulsification of condensed water in crankcase
To ensure perfect operation, BAUER KOMPRESSOREN recommends using only
those oils listed in this operating instructions and that have been tested and ap-
proved by us, see Lubrication oil list, Page 80.
Lubrication oil list
BAUER KOMPRESSOREN units are delivered ex factory with oil filling (order num-
ber N28355).
Oil type Type of applica-
tion
Ambient tem-
perature
Designation Order no. Oil type
BAUER compres-
sor oil
N28355 Synthetic Breathing air +5...+45°C
BAUER compres-
sor oil
N22138 Mineral Breathing air +5...+45°C
Tab. 19 Lubrication oil list
BAUER compressor oil can be delivered in the following packing units:
Volume
Oil type
Synthetic oil N28355 Mineral oil N22138
0.5-l cylinder N28355-0.5 N22138-0.5
1-l cylinder N28355-1 N22138-1
5-l can N28355-5 N22138-5
20-l can N28355-20 N22138-20
Tab. 20 Packing units - BAUER compressor oil
9 | Maintenance
OPERATING MANUAL
80/106
A_Compact-Line_002_en
10-10-2016