6.2 Assembling the unit
6.2.1 Installing the unit
DANGER
Danger of poisoning!
Never use units with a gas engine inside closed rooms.
Never use units around open flames.
WARNING
Danger of injuries due to improper assembling!
Improper assembling can result in personal and material damage.
Install and connect the unit properly and in accordance with the relevant
guidelines.
1.
Install the unit such that it is not exposed to direct sunlight.
2.
Ensure that the machine can be accessed from all sides.
3.
Ensure that there is 50 cm of space around the machine for fitting and disas-
sembling the lines as well as for maintenance work and disassembling and as-
sembling the machine.
4.
The unit should be installed in such a way that the cooling fan on the compres-
sor can draw in cool air from the outside. For this, install the unit as close as
possible to the suction opening.
5.
Install the unit in such a way that intake of heated up or even hot air is avoi-
ded.
6 | Installation
OPERATING MANUAL
56/106
A_Compact-Line_002_en
10-10-2016
To Next Page
Loading...
