Instructions regarding handling breathing air
Follow the following instructions to ensure the safety of the user:
•
Adhere to the filter service life.
•
When changing the cartridge, particular attention must be paid to hygiene and
general cleanliness.
•
Use permissible lubricant and cleaning agent only for breathing air.
•
Get a replacement cartridge and store it properly.
•
Keep in mind the storage period of the filter cartridge.
•
Do not use filter cartridges with damaged packaging.
•
Record filling processes in a logbook.
•
Check the air quality or have it checked at regular intervals.
•
Do not fill breathing air from rooms that are used as a working space.
2.4.7 Safety and monitoring equipment
Provide the following safety equipment and ensure their function:
•
Do not remove the protection guard from moving parts when the machine is
being operated.
•
If needed, design the return flow (e.g. natural gas) in such a manner that there
is no danger to people and the environment. Comply with the statutory provi-
sions.
•
Rule out dangers arising due to electrical energy by earthing and using suita-
ble fuses.
Emergency stop switch
In machines without a separate emergency stop switch, the red-yellow main switch
assumes the function of an emergency stop switch.
•
Press the emergency stop switch in case of an emergency.
The control voltage will be interrupted and the machine will turn off.
2.5 Instructions regarding emergency
2.5.1 Behaviour in case of faults and emergencies
If safety-relevant faults occur in the machine or the operating behaviour indicates
this:
•
Switch off the machine using the emergency stop switch and notify the au-
thority/person responsible of the fault.
•
Only trained and authorised specialist personnel may rectify the faults.
•
Restart the machine only after the cause of the fault has been determined and
rectified.
OPERATING MANUAL
For your safety | 2
10-10-2016
A_Compact-Line_002_en
23/106
To Next Page