Bauer Compact-Line JUNIOR II-B - Changing the Oil Type

9.5.3 Changing the oil type

Oil is drained
NOTICE
Damage to unit due to improper change of oil type!
Adhere to the following instructions when switching over to another oil type.
1.
Check the valves, coolers, separators and lines for deposits.
Are deposits present in valves, coolers, separators or lines?
Remove deposits, or replace valves, coolers, separators and lines.
2.
Fill compressor with new oil.
3.
After 100 operating hours: Check the compressor oil for total contamination
level. Change the oil if it is severely contaminated.
9 | Maintenance
OPERATING MANUAL
84/106
A_Compact-Line_002_en
10-10-2016