Baumer E0201 - Applicable Standards; Safety Notes; Warnings, Cautions and Symbology

Instructions for Use
Code: IU.01.09.0007
Version / Revision: 6.001
Page: 53 de 143
Ultrasonic washer
Model: E0201
E0201 Ultrasonic washer line
Capacities (l)
042
062
080
Model
E0201-042
E0201-062
E0201-080
Tank dimension(mm)
300x700x200
420x762x200
300x670x200 (x2)
Cap. Basket
1
1
2
Cap. Basket ISO
3
4
4
Width (mm)
1000
1000
1700
Depth (mm)
500
500
500
Height (mm)
484
484
484
Package (cm)
120x85x79
120x85x79
190x85x79
Net weight (kg)
92
95
100
Gross Weight (kg)
122
125
150
Useful volume (l)
27,3
40
52
Other capacities must be consulted with the manufacturer.
The equipment with a capacity of 62 l is compatible for cleaning robotic systems.
2.1 Applicable standards
The validation methods are based on the following standards:
• EN ISO 15883-1 - Washer-disinfectors — Part 1: General requirements, terms and definitions and tests;
• ISO/TS 15883-5 - Washer-disinfectors — Part 5: Test soils and methods for demonstrating cleaning efficacy.
3. Warnings, cautions and symbology
The security symbologies is listed below, and serve as a guidance.
Danger - Failure to follow the procedures recommended in this warning can lead to serious injury and
property damage.
Attention - Failure to follow the procedures recommended in this warning may lead to equipment
malfunction or property damage.
Note - The text is intended to provide important information for the correct understanding and proper
functioning of the equipment.
3.1 Safety Notes:
The instructions in the manual are intended to reduce the risk of injury to personnel using the equipment and to avoid
interpretations that compromise the safety of the equipment due to improper maintenance. Operators or maintenance
personnel must follow this manual for the use and maintenance of this equipment.