Code: IU.01.09.0007
Version / Revision: 6.001
Page: 92 de 143
Ultrasonic washer
Model: E0201
17. Accessories & Supplies
Cabinet made of AISI 304 steel, with a capacity of 200 to 500 liters, to store detergents and lubricants.
Designed to minimize the efforts of operators to remove the basket inside the ultrasonic pan.
Dimensions: 1000x600x620 mm.
Note: *The code will be completed by the product variation (dimensions, for example), without changing
other characteristics (intended use or requirements). Example: E0203-001, E0203-005, etc. Limited to
variation 5 (excluding variation 2). Other capacities must be consulted with the manufacturer.
Bench made of AISI 304 steel, to support the ultrasonic washer, with the possibility of using a tub for
manual cleaning before sending the instruments into the washer.
Bench dimensions: 2000x650x900 mm
Tank dimensions: 800x400x250 mm.
Note: *The code will be completed by the product variation (dimensions, for example), without changing
other characteristics (intended use or requirements). Example: T0101-001-X, T0101-012-X, etc. Other
capacities must be consulted with the manufacturer.
Ultrasonic washing
machine bench
Kit for silicone lid with through hole from Ø 1 mm to Ø 10 mm.
Engraving of the respective diameters (1mm to 10mm) on the front of the cover.
Below is a description of what the kit consists of.
Description/ Quantity
Cannulated cap Ø 1 mm/ 5 Pieces
Cannulated cap Ø 2 mm/ 5 Pieces
Cannulated cap Ø 3 mm/ 5 Pieces
Cannulated cap Ø 4 mm/ 5 Pieces
Cannulated cap Ø 5 mm/ 5 Pieces
Cannulated cap Ø 6 mm/ 5 Pieces
Cannulated cap Ø 7 mm/ 5 Pieces
Cannulated cap Ø 8 mm/ 5 Pieces
Cannulated cap Ø 9 mm/ 5 Pieces
Cannulated cap Ø 10 mm/ 5 Pieces
Cannulated cap kit ø 1
mm to ø 10 mm
Assembly of the water and detergent flow system that feeds the flow system inside the vat.
Components highly resistant to working temperature inside the vat, giving the operator the possibility of
choice.
To Next Page
Loading...