baxter Flo-Gard 6201 - Warranty Information

1 Warranty Information
1-4 FLO-GARD 6201 VOLUMETRIC INFUSION PUMP SERVICE MANUAL 07-19-B1-688
Warranty Information
Baxter Healthcare Corporation (“Baxter”) warrants that the equipment shall
be free from defects in material and workmanship when delivered to the
original purchaser. Baxter’s sole obligation shall be limited to repair or
replacement, at Baxter’s option and expense, of the defective part or unit,
excluding batteries, for a period of one year following the date of initial
delivery. The warranty for batteries is limited to a period of six months
following the date of initial delivery.
The warranty extends only to the original purchaser and is not assignable or
transferable, and shall not apply to auxiliary equipment or disposable
accessories.
THERE ARE NO OTHER WARRANTIES INCLUDING ANY IMPLIED
WARRANTY AND ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE WHICH EXTEND BEYOND
THE DESCRIPTION OF THE PRODUCT AND THOSE EXPRESSLY SET
FORTH IN ITS LABELING. UNLESS USED ACCORDING TO THE
DIRECTIONS ACCOMPANYING THE PRODUCT, ALL WARRANTIES
ARE SPECIFICALLY EXCLUDED. In no event shall Baxter be responsible
for incidental, consequential or exemplary damages. Modification, alteration,
recalibration, abuse, or service by other than a Baxter authorized
representative may void this warranty.
CAUTION
When troubleshooting the pump, do not inject or apply signals unless the
procedures herein specifically instruct you to do so. Damage to the pump or its
subassemblies could result.
CAUTION
Tighten fasteners to the torque values specified in the procedures. Do not
overtighten any fastener.
CAUTION
Ensure that connectors are mated and observe the correct orientation.
CAUTION
Where connectors are identified as “locking,” unlock the connectors before
removing cables.
CAUTION
Note the routing of the wires before removing them.
CAUTION
Fully unlock flat ribbon cable connector flange before removing cable. Attempting
to remove the cable while locked can damage the cable and connector.
CAUTION
Ensure that the door assembly is properly latched prior to transport or storage.