MX680RD User’s Manual
17. After the Win10 installation is completed, install the Intel RST driver.
3.8 The “JAMP1” audio header:
When the rear I/O audio port is connected with speakers, there is no audio output on
“JAMP1” header, unless the speaker connection on the rear I/O connection is
disconnected.
3.9 The Intel “MEBx” (iAMT):
1. Enter BIOS menu.
2. Enter “MEBx” option (on far right of BIOS menu).
3. Click on “Intel ME Password. For the 1st time enter, type “admin” first, then Intel MEBx
will ask for a new password setup.
NOTE:
Intel® ME passwords must be between 8 and 32 characters long, have at least one upper
case character, one lower case character, one number, and a special character
(for example: !, @, #, $, %, ^, &, *).
4. The MEBx menu will be prompted. Please refer to the Intel document
“619907_ADL_S_TMDG_Rev1p0.pdf” for option details.
(https://www.intel.com/content/www/us/en/support/articles/000005897/boards-and-kits/desktop-
boards.html).
To Previous Page
Loading...
