BCM MX680RD - Parity [None]; Stop Bits [1]; Flow Control [None]; VT-UTF8 Combo Key Support [Enabled]

MX680RD User’s Manual
82
2.4.9.2.4 Parity [None]
A parity bit can be sent with the data bits to detect some transmission errors
Configuration options: [None], [Even], [Odd], [Mark], [Space]
2.4.9.2.5 Stop Bits [1]
Stop bits indicate the end of a serial data package
Configuration options: [1], [2]
2.4.9.2.6 Flow Control [None]
Flow control can prevent data loss from buffer overflow.
Configuration options: [None], [Hardware RTS/CTS]
2.4.9.2.7 VT-UTF8 Combo key Support [Enabled]
Enable VT-UTF8 combination key support for ANSI/VT100 terminals
Configuration options: [Enabled], [Disabled]
2.4.9.2.8 Recorder Mode [Disabled]
With this mode enabled only text will be sent.
Configuration options: [Enabled], [Disabled]
2.4.9.2.9 Resolution 100x31 [Disabled]
Enables or disables extended terminal resolution
Configuration options: [Enabled], [Disabled]
2.4.9.2.10 Putty Keypad [VT100]
Selects function key and keypad on putty
Configuration options: [VT1000], [LINUX], [XTERMR6], [SCO], [ESCN], [VT400]