MX680RD User’s Manual
1.11 The Expansion Slots
In the future, you may need to install expansion cards. The following sub-sections describe the
expansion slots and the expansion cards that they support.
NOTE:
Make sure to unplug the power cord before adding or removing expansion cards.
Failing to do so may cause injury and damage mainrboard.
1.11.1 Installation of Expansion Card
To install an expansion Card:
1. Before install the expansion card, read the documentation that came with it and make the
necessary hardware setting for the card.
2. Be sure there is no power connection to the system.
3. Remove the chassis cover (if the mainboard is installed in the chassis).
4. Remove the expansion slot bracket from the chassis on the slot that you intend to use.
Keep the screw for later use.
5. Align the card connector with the slot and press it firmly until the card is completely seated
on the slot.
6. Secure the card to the chassis with the screw that have been removed earlier (in step 4).
7. Place the chassis cover back on.
To Next Page
Loading...
