MX680RD User’s Manual
2.4.4.2 Security Device support [Disable]
Enable or Disable BIOS support security device (TPM)
Configuration options: [Enable], [Disable]
NOTE:
1. When “Security Device Support” is enabled, it requires to save and exit BIOS once.
And then And then reboot the system in order to initiate the TPM support at BIOS.
2. When TPM is enabled and utilized through TPM software under OS, there is a
possibility that the encrypted data will not be accessible, or recoverable if one of the
following situations occurred:
1. Lost of TPM password.
2. System or board failure, or being replaced.
3. Hard Drive failure.
To Next Page
Loading...
