Bdcom S6508 User Manual

BDCOM S6508 Switch Hardware Installation Guide
2. config data in config mode
In actual work, we need config parameter about system, workload and interface.
Specific parameter configuration can refer to S6508 switch related manual(
《
S6508
switch configuration manual
》
and
《
S6508 switch command manual
》
You can write Config command into a text file, and mounted the command file directly
into flash. Whole step can refer to chapter “upload and download configuration file”.
In order to use the current configuration into the incept configuration of S6508, please
use “write” command to save the current configuration into incept configuration files of
flash. And users can look over the incept configuration files by “show startup-config”
command.
3. check whether config file is right
After finishing configuration, you can use command”show running-config” to check
current configuration, CURRENT CONFIGURATIION is command that is effect in
current running systerm.
switch#show running-config
Detail about command theroy and command operation, please refer to related
doc(
《
s6508 switch configuration manual
》
and
《
s6508 switch command manual
》
)
4.7 upload and download configuration file
Please refer to
《
S6508 switch configuration manual
》
.
- 53 -

Bdcom S6508 Specifications

General

Brand	Bdcom
Model	S6508
Category	Switch
Language	English