Bdcom S6508 - 6.4 Software Installation Troubleshooting

BDCOM S6508 Switch Hardware Installation Guide
6.4 trouble shooting about software installation
【trouble 1】
Serical port console is no output.
【trouble description】
After power on, no prompt information in serical console.
【trouble shooting】
First confirm console cable is connected rightly, or cable is broken, connected COM
port is justly port that hyperTerminal program specify. Configuration parameter of COM
port is identify with
§
4.2 said. If not, please change COM configuration parameter
in accordance to
§
4.2 . If still no effect, please contact with the technology supporter
of Shanghai Baud Data Communication Co., Ltd.
【trouble 2】
Serical port console output mis-character.
【trouble description】
Serical port console show mis-character, so that it cannot indentification.
【trouble shooting】
COM configuration parameter is wrong, please check it, ensure these parameter is
same with
§
4.2
- 60 -