Bender ISOMETER IRDH575 User Manual

114
IRDH575_D00089_05_M_XXEN/01.2020
A
Alarm LED 1 39
Alarm LED 2
39
Alarm messages
85
Alarm relays, operating principle setting
51
Automatic self test, repetition time
55
Automatic self test, starting time
56
B
BMS bus, address ranges 88
BMS Master
82
BMS protocol
82
BMS Slave
83
C
Changing the measuring principle 55
Characteristic curves, EDS46... /EDS49...
- Allowable response values for 3 AC
systems
100
- Allowable response values for 3AC
systems
100
- Allowable response values for AC sys-
tems
100
- Allowable response values for DC sys-
tems
101
Characteristic curves, EDS470
- Allowable response values insulation
fault in relation to nominal voltage
102
- Allowable system leakage
capacitance in relation to the system
voltage
104
- Reduction of the response sensitivity
in relation to Cemax
105
Characteristic curves, EDS473
- Allowable response values insulation
fault in relation to nominal voltage
106
- Allowable system leakage
capacitance in relation to the system
voltage
107
- Reduction of the response sensitivity
in relation to Cemax
108
Characteristic curves, IRDH575
- Current output 0...20 mA
98
- Current output 4...20 mA
99
- Max. AC voltage between system and
earth
97
- Response time in relation to system
leakage capacitances
96
Checking all BMS bus nodes
70
Combination with EDS46... devices
86
Commissioning flow chart IRDH575
33
Commissioning of a BMS network
87
Current output 0/4...20 mA
99
INDEX

Bender ISOMETER IRDH575 Specifications

General

Brand	Bender
Model	ISOMETER IRDH575
Category	Measuring Instruments
Language	English