Menu
53
NGRM7xx_D00292_07_M_XXEN/02.2022
2)
NTP (menu 7.2.6)
on Synchronisation via NTP server is enabled. To use this function, configure the NTP server.
off Synchronisation is disabled.
3)
UTC (menu 7.2.8)
Set the time according to UTC (Coordinated Universal Time). For Germany, set +1 for winter-
time (MEZ) and +2 for summer time (MESZ).
4)
Interface (menu 7.3)
Set the parameters for connecting other communication devices in the interface menu:
Write access (menu 7.3.1)
Set whether the parameters of the device can be changed via Modbus or web server. Dis-
playing and reading out data via Modbus and web server is always possible, regardless of
this setting.
Allow Allow external parameter setting.
Deny Deny external parameter setting.
Ethernet (menu 7.3.2)
Set the parameters for communication with other devices via the Ethernet interface. The
Ethernet interface can be used for communication with Modbus, web server and BCOM.
DHCP (menu 7.3.2.1)
on Enable automatic IP address assignment (IP address, subnet mask, standard gateway). Man-
ual address settings are ignored.
off Disable automatic IP address assignment. Enter settings (IP address, subnet mask and stand-
ard gateway) manually in the menu
The used IP address is displayed in the Info menu (INFO button or menu 9).
To Next Page
Loading...
Need help?
General
