58
No Description Class
1 Noise
1.1 When power on or power off, fan or color wheel get abnormal noise. Major
1.2 When normal operation, noise exceed noise level (refer to C201 document) Major
2 Display Quality (include input: Video, S-video, YPbPr, and D-sub or RGB)
2.1 Focus range out of specification Major
2.2 Focus fail (focus not clear or flare/ defocus/ lateral color out of specification) Major
2.3 Brightness & Uniformity --- out of specification. Major
2.4 Contrast ratio --- out of specification Major
2.5 Color coordinates --- out of specification. Major
2.6 Light leakage out of specification (active area or out of active area) Major
2.7 Throw ratio out of specification Major
2.8 Room ratio out of specification Major
2.9 Picture distortion out of specification Major
2.10 DMD image out of specification Major
2.11 Picture dust or other image quality out of specification Major
2.12 Gray stage check --- Missing stage Major
2.13 Video noise --- If video noise presented Major
2.14 DDC data error / incorrect Major
2.15 Mode detection error Major
2.16 OSD Malfunction Major
3 Audio Quality
3.1 Audio malfunction Major
3.2 Speaker no function Major
3.4 Volume mute malfunction Major
4 Remote control malfunction Major
4.1 Receiver range: 0~7 m Receiver angle: ± 30 degree (vertical and horizontal) Major
To Next Page
Loading...
