My BERNINA
18
Illustration Name Purpose
Spool disc To support the regular
unwinding of the thread from
the spool.
3 different sizes for thread
spools in different sizes.
Bobbin
4 pieces, 1 of them in the
machine
To wind the bobbin thread.
Foam pad
2 pieces
To prevent the thread from
slipping under the spool holder,
tangling and breaking.
Touchscreen pen For precise operation of the
touch display.
Seam ripper To undo seams and to cut
buttonholes open.
Screwdriver red (slot) To loosen and tighten slotted
screws.
Brush To clean the feed dog and the
looper area.
Sewing machine oil To oil the machine.
Power cable To connect the machine with the
power supply system.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one contact is wider than the other). To reduce the risk of electric shock,
the plug can only be plugged into the socket in one way. If the plug does not fit into the socket, turn the
plug. If it still does not fit, contact an electrician to install an appropriate outlet. Do not modify the plug in
any way.
Foot control (only USA/Canada) (Optional accessory)
Use only foot controller type LV-1 with BERNINA 500.
To Next Page
Loading...
