Embroidery preparation
32
> Place the thread spool on the spool pin.
Horizontal spool pin
Placing the foam pad, the thread spool and the spool disc
The spool disc provides an even unwinding of the thread from the thread spool. The spool disc is only used
with the horizontal spool pin.
> Place the foam pad on the spool pin.
> Place the thread spool on the spool pin.
> Position the appropriate spool disc on the spool pin so that there is no space between the spool disc and
the thread spool.
Using a spool net
The spool net holds the thread on the thread spool and prevents the thread from knotting and breaking.
> If available, slide the spool net over the thread spool.
2.5 Free arm
The BERNINA 500 provides a solidly designed free arm which offers a lot of space for large project on the
right of the needle.
To Next Page
Loading...
