Appendix
95
7 Appendix
7.1 Maintencance and cleaning
Cleaning the display
> Clean the display in the switched off status with a soft slightly damp microfiber cloth.
Removing thread remnants under the stitch plate
CAUTION
Electronically driven components
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
Remove the thread remnants under the stitch plate regularly.
> Remove the presser foot and the needle.
> Remove the stitch plate.
> Remove the thread remnants under the stitch plate.
Cleaning the hook
CAUTION
Electronically driven components
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
> Open the bobbin cover.
> Remove the bobbin case.
> Push the fastening bracket to the left.
> Flap down the fastening bracket along with the black hook race cover.
To Next Page
Loading...
