My BERNINA
20
Illustration Name Purpose
Multiple-spool holder For quick access to the thread
spools and thread changes, e.g.
for multicolored embroidery
motifs.
For a longer way to the needle
and therefore to the option to
untangle difficult threads before
embroidering.
Spool disc To support the regular
unwinding of the thread from
the spool.
3 different sizes for thread
spools in different sizes.
Bobbin
4 pieces, 1 of them in the
machine
To wind the bobbin thread.
Foam pad
2 pieces
To prevent the thread from
slipping under the spool holder,
tangling and breaking.
Touchscreen pen For precise operation of the
touch display.
Seam ripper To undo seams and to cut
buttonholes open.
Screwdriver Torx, gray To change the needle.
Screwdriver red (slot) To loosen and tighten slotted
screws.
Angular Torx wrench Torx To open the headframe.
Brush to clean the feed dog and the
hook race area.
Oil pen To fill up the oil depots.
Power cable To connect the machine with the
power supply system.
To Next Page
Loading...
