Bernina 700 - Selecting the Embroidery Foot in the User Interface

Embroidery preparation
36
> Guide the embroidery foot upwards over the cone (2).
1
2
> Press the clamping lever down.
Selecting the embroidery foot in the User Interface
After having attached the respective embroidery foot (Embroidery foot No. 26, supplied accessory with the
embroidery module), you can select and save it on the machine. Moreover, alternative feet are displayed
which will also be suitable for the selected embroidery motif.
> Switch the machine on.
> Select an embroidery motif.
> Touch the icon «Presser foot display/Presser foot selection».
> Touch the icon «Optional presser feet» to display all the suitable feet for the selected embroidery motif.
> Select the attached embroidery foot.