Attachment
103
7.3 Error messages
Message on the display Cause Repair
The selected needle and stitch
plate cannot be used in
combination.
> Replace the needle.
> Replace the stitch plate.
The needle is not at its top end. > Adjust the needle position via the handwheel.
The upper thread is used up. > Rethread.
The upper thread has broken. > Rethread.
The bobbin thread is used up. > Rethread.
The bobbin thread has broken. > Clean the hook.
> Rethread.
The main motor isn't running. > Turn the handwheel clockwise until the needle is at its
top position.
> Remove the stitch plate.
> Remove the thread remnants.
> Clean the hook.
> Remove the hook and make sure that there are no
pieces of broken needle points on the magnetic back of
the hook.
The fabric under the presser foot
is too thick.
> Reduce the fabric thickness.
To Next Page
Loading...
