Berthold Duo Xpert - Recall; Recall to calibration set

7 Main Menu Device Setup LB 470 Level
110
56925BA2 Rev. 03, 11/2017
Recall
Device settings | Setup | Calibration | Recall
1
2
Button <Recall>
Window
″
Recall measurement to parameter set
″
Fig.
90 Recall
Recall to calibration set
1. Click on the button < Recall > if you want to copy the measurement set into
the calibration set.
2. The window with the message ″Recall measurement to calibration set″ ap-
pears.
3. Click on < Yes >.
 The calibration parameter set was overwritten.