KB (E4 + E6) 02/2017 page 121/148
21. Disposal
21.1 Disposal of the transport packing
Straps to fix packing on pallet
Wooden transport box (option)
with metal screws
Non-wood (compressed match-
wood, IPPC standard)
Wood recycling
Pallet for KB 53 / 115 (E4)
Solid wood (IPPC standard)
Pallet for KB 240 / 400 / 720 (E6)
with foamed plastic stuffing
Solid wood (IPPC standard)
Shipping box
with metal clamps
Removal aid for
KB 115
Karton Papier-Recycling
Kunststoff Kunststoff-Recycling
Protection of doors and racks
Insulating air cushion foil (packing
of optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
21.2 Decommissioning
Turn off the main power switch (1). Disconnect the chamber from the power supply.
When switching off the main power switch ON / OFF (1), the stored parameters remain saved.
• Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
• Final decommissioning: Dispose of the chamber as described in chap. 21.3 to 21.5.
21.3 Disposal of the chamber in the Federal Republic of Germany
According to Annex I of Directive 2012/19/EU of the European Parliament and of the Council on waste
electrical and electronic equipment (WEEE), BINDER devices are classified as “monitoring and control
instruments” (category 9) only intended for professional use“. They must not be disposed of at public col-
lecting points.
The chambers bear the symbol for the marking of electrical and electronic equipment man-
ufactured / placed on the market in the EC after 13 August 2005 and be disposed of in sep-
arate collection according to Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) and German national law for electrical and electronic equipment (El-
ektro- und Elektronikgerätegesetz, ElektroG). WEEE marking: crossed-out wheeled bin with
solid bar under. A significant part of the materials must be recycled in order to protect the
environment.
To Next Page
Loading...
