Binder KB 53 (E4) - Deleting a Week Program

KB (E4 + E6) 02/2017 page 76/148
With “Exit (without saving!)” you exit the program editor without saving the program. There is a security
question first:
Fixed value
08.03.2015 05:05:06
Submenu “Exit (without saving)”.
This a security question. Select the desired function
and press the operating button.
Then there is an additional security question. Select
the desired function and press the operating button.
..\ Exit (without saving)
Do not exit
Really exit (without saving!)
Close
If you selected “Really exit (without saving!)”, the controller goes back to the initial view.
10.4 Deleting a week program
To delete a week program, go to Menu > Programs > Week program > Delete or
Menu > Programs > Week program > Delete all
Fixed value
08.03.2015 05:05:06
Submenu “Week program”.
Select “Delete” or “Delete all”
and press the operating button.
..\ Programs\Week program
Start
Stop
Edit
Create
Rename
Delete
Delete all
Close Home
If you selected “Delete”, select then the week program to be deleted and press the operating button.
If you selected “Delete all”, all week programs will be deleted in the controller.
Before deleting there is a security question:
Fixed value
08.03.2015 05:05:06
Submenu “Confirm operation”.
This a security question. Select the desired function
and press the operating button.
..\ Confirm operation
Do not delete
Really delete
Close Home
Go back to the initial view with “Home”.