KB (E4 + E6) 02/2017 page 20/148
3.2 Guidelines for safe lifting and transportation
The front castors of KB 240 / 400 / 720 can be blocked by brakes. Please move the chambers with cas-
tors only when empty and on an even surface, otherwise the castors may be damaged. After operation,
please observe the guidelines for temporarily decommissioning the chamber (chap. 21.2).
CAUTION
Sliding or tilting of the chamber.
Damage to the chamber.
Risk of injury by lifting heavy loads.
Transport the chamber in its original packaging only.
For moving or shipping, secure the chamber with transport straps.
Do NOT lift or transport the chamber using the door, the handle, or the lower housing.
Lift KB 53 / 115 with the aid of four people in the area of all 4 chamber feet.
Lift KB 240 with the aid of 6 people or with a fork lifter. Set the fork lifter only from the
front or rear in the middle of the chamber.
Do NOT lift KB 400 / 720 by hand.
Lift KB 400 / 720 using technical devices (fork lifter). Set the fork lifter only from the
front or rear in the middle of the chamber.
Do NOT set the fork lifter from the chamber side.
• Permissible ambient temperature range during transport: -10 °C / 14°F to +60 °C / 140°F.
You can order transport packing for moving or shipping purposes from BINDER service.
3.3 Storage
Intermediate storage of the chamber is possible in a closed and dry room. Observe the guidelines for
temporary decommissioning (chap. 21.2).
• Permissible ambient temperature range during storage: -10 °C / 14°F to +60 °C / 140°F.
• Permissible ambient humidity: max. 70 % r.H., non-condensing
When after storage in a cold location you transfer the chamber to its warmer installation site, condensa-
tion may form. Before start-up, wait at least one hour until the chamber has attained ambient temperature
and is completely dry.
To Next Page
Loading...
