Bioquell QUBE - Operator Maintenance: Glove and Sleeve Replacement

USER MANUAL
TD069-O&M-001
REVISION 6
Page 58 of 80
6.1.2Replacing Gloves
Follow the procedure described in the images below to change the safe change
gloves. Within the QUBE decontaminate the cuffs and sealed pack of sterile
gloves.
This allows for the old glove and cuff to be ejected out of the QUBE while
maintaining aseptic conditions:
NOTE: Ensure only Hydrogen Peroxide compatible gloves are used (BQ Part No
H07990534).
6.1.3Fitting New Sleeves
Follow the procedure described in the images below:
1
2
3
4
1
2