USER MANUAL
TD069-O&M-001
REVISION 6
Page 27 of 80
3.4 Hydrogen Peroxide Supply
The QUBE has been designed to use only Bioquell approved 35% w/w Hydrogen
Peroxide in 150ml bottles. Note the usable volume is 140ml.
Each bottle contains a Radio Frequency Identification (RFID) tag which enables
the bottle’s batch number, volume of Hydrogen Peroxide remaining and expiry
date to be read automatically by the QUBE.
Hydrogen Peroxide must never be stored in direct sunlight. It must be stored at
25°C or below. All Bioquell Hydrogen Peroxide bottles are vented to prevent
build-up of gas. Each consumable bottle must be kept upright.
Figure 23: QUBE consumable bottle
Figure 24: QUBE bottle labelling
Each consumable bottle has a multi-language booklet label attached with detail
translated into languages relevant to the territory supplied. A Material Safety
Data Sheet (MSDS), Certificate of Analysis and supplemental labelling, as
applicable, is available in the language(s) relevant to the territory and is on the
Bioquell web site.
Personal Protective Equipment must be used when
handling consumable bottles which contain Hydrogen Peroxide. As a
minimum Bioquell suggest wearing suitable gloves and eye protection.
WARNING – Once opened, the bottles are no longer leak tight and
so should be stored upright.
To Next Page
Loading...