Bioquell QUBE - General QUBE Safety Guidelines

USER MANUAL
TD069-O&M-001
REVISION 6
Page 8 of 80
1.1.1Consumable H
2
O
2
bottle labelling symbols explained
CHEMICAL INJURY
HAZARD
Hydrogen Peroxide
liquid is hazardous –
corrosive
CHEMICAL INJURY
HAZARD
Hydrogen Peroxide
liquid is harmful and
is an oxidizing agent
RFID This product contains an
RFID tag
Note: Further information relating to safety for the Hydrogen Peroxide is
available from on the MSDS provided with the consumable.
1.2 General Safety Information relating to the QUBE
WARNING – EQUIPMENT DAMAGE
The
QUBE system
, once installed, only require
s
moving forward to enable
cleaning of all sides. If the equipment is to be moved across a threshold or
any substantial distance then it should be completely disassembled and re-
assembled by trained personnel to ensure safe operation once re-
positioned. Cables must not, at any time, be trailed causing a trip hazard.
Ensure supporting feet (x2) are retracted prior to moving any QUBE
system. The weight of the QUBE system is dependent upon the
configuration; however, local manual handling regulations must be adhered
to. To prevent damage to the QUBE do not manoeuvre by handling the front
screen, glove ports or gas strut covers.
Avoid moving the
QUBE system
(or any part thereof)
once a cycle has been
started.
Prior to switching on the QUBE system ensure
all doors are closed.
Operate the equipment strictly in accordance with the Operating
Instructions.