USER MANUAL
TD069-O&M-001
REVISION 6
Page 14 of 80
2.3 Optional Sub-systems
The following sub-systems are not integrated into the QUBE as standard but
available to order as part of the configuration:
2.3.1Glove Tester
Figure 3: Glove Tester
The Glove Tester (Part No.TD069-5900)
is an accessory that can be supplied
with the QUBE system to enable the
leak testing of sleeves and gloves.
A glove test cannot be performed on a
QUBE module which is being
decontaminated.
For information on how to use the glove tester refer to Instructional Leaflet
TD069-5900_PDS (supplied with glove tester).
2.3.2Sterility Test Pump
The QUBE system has been designed to work with the Merck Millipore SteriTest
Symbio Flex or Equinox Isofit Pump for sterility testing applications. The
“SteriTest” unit is fully integrated into the chamber moulding.
Figure 4: Sterility test unit in use (Equinox shown)
To Next Page
Loading...