Bitzer ACP Link - Page 98

98 CT-600-2
No. Alarm / warning
description
Related
function
Possible causes
84 Motor Temperature
Cooldown
2.28
85 Sensor: Discharge
Temperature
2.28 Sensor or connection error
86 Sensor: Aux Temperature 2.28 Sensor or connection error
87 Sensor: Suction Pressure 2.28 Sensor or connection error
88 Sensor: Discharge Pressure 2.28 Sensor or connection error
89 Sensor: Oil protection 2.28 Sensor or connection error
90 High Pressure Switch 2.28 High pressure switch (safety chain) activated
91 Datalog error 2.28
92 Output Current: Total Value
Low
2.28
93 Output Current: Total Value
High
2.28
94 Sensor: Suction Pressure
Signal Low
2.28 Sensor or connection error
95 Sensor: Suction Pressure
Signal High
2.28 Sensor or connection error
96 Sensor: Discharge Pressure
Signal Low
2.28 Sensor or connection error
97 Sensor: Discharge Pressure
Signal High
2.28 Sensor or connection error
98 Minimum Compressor Stop
Time Not Respected
2.28
99 Minimum Compressor Run
Time Not Respected
2.28
100 Minimum Compressor Start
To Start Time Not
Respected
2.28
101 Head Fan Cycle Count Per
Hour Exceeded
2.28
102 Oil Injection Has No Effect 2.28
103 Output Current: Oil Heater
Low
2.28
104 Output Current: Oil Heater
High
2.28