Bitzer ACP Link - Page 99

CT-600-2 99
No. Alarm / warning
description
Related
function
Possible causes
105 Output Current: Additional
fan (Head fan) Low
2.28
106 Output Current: Additional
fan (Head fan) High
2.28
107 Output Current: CR-1 Low 2.28
108 Output Current: CR-1 High 2.28
109 Output Current: CR-2 Low 2.28
110 Output Current: CR-2 High 2.28
111 Output Current: CR-3 Low 2.28
112 Output Current: CR-3 High 2.28
113 Output Current: Unloader
Low
2.28
114 Output Current: Unloader
High
2.28
115 Output Current: Oil Inj Low 2.28
116 Output Current: Oil Inj High 2.28
117 Output Current: Liquid Inj
Low
2.28
118 Output Current: Liquid Inj
High
2.28
119 Too many identical timed
reset faults in 24 hours
2.28 Requires manual reset
120 Too many timed reset faults
in 1 hour
2.28 Requires manual reset
121 Slider: No pulses detected 2.28
122 Slider: One or more sensor
magnets are missing
2.28
123 Slider: Something was
wrong with the data
samples
2.28
124 Slider: Too many magnets
were detected
2.28
125 Slider: Slider position out of
bounds
2.28
126 Slider: Moving Vi slider
failed
2.28