Black Box WRT750A - Appendix B: Configuring the PC

Page 115
877-877-2269 | blackbox.com
Appendix A: FAQ
Appendix B: Configuring the PC
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet
Adapter is working, then refer to the adapter’s manual if needed.
Follow these steps to install the TCP/IP component.
1. On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2. Click the Network and Internet Connections icon, and then click on the Network Connections tab in the appearing window.
3. Right click the icon that showed below, select Properties on the prompt page.
Figure B-1. Properties option.
4. In the prompt page shown below, double click on the Internet Protocol (TCP/IP).
Figure B-2. Select TCP/IP.