Matte View Invert
When combined matte view or internal matte view is selected as the monitor output, the matte
polarity can be reversed by the matte view invert function.
Monitor Out RGB
When selected, the monitor output will show all three color channels of the image viewed.
Monitor Out Red, Green and Blue
All three color channels can also be viewed independently. When the respective color channel
button is enabled, the monitor output will only show that particular color channel as a black and
white image. This can be helpful to spot noise, which is predominantly in the blue channel.
Custom Monitor Output Menu
The monitor out section of the Smart Remote 4 touchscreen provides 6 soft buttons which
switch the view on Ultimatte 12’s monitor output. These 6 soft buttons can be customized using
the ‘custom monitor out’ settings.
The first two soft buttons in the functions area of the touchscreen are labeled ‘standard’ and
‘inputs’. These let you set the labels of the buttons to the standard default Ultimatte monitor
output buttons, or you can match the buttons to the respective inputs. When inputs is selected,
you can easily monitor every source by pressing the respective input button.
Below is the configuration for each setting:
Standard
PGM Out
FG In
BG In
Combined Matte
Internal Matte
Fill Out
Inputs
BG In
Layer In
BG Matte In
Garbage Matte In
Holdout Matte In
Layer Matte In
You can also create up to 4 custom monitor out buttons. These can be set to show your favorite
views in the order of your choosing.
414141Changing Settings
To Next Page
Loading...
Need help?
General
