21
Camera Settings
Focus Peaking
Allows you to change the level of focus peaking. The settings include: off, low, medium and high.
Adjust this setting when you are using a very sharp lens and the peaking covers the entire image.
The default setting is medium.
Front Tally Brightness
Changes the brightness of the front tally light. Settings include: off, low, medium and high. The
default setting is medium.
Rear Tally Brightness
Changes the brightness of the rear tally light. Settings include: low, medium and high. The default
setting is medium.
Tally Light Brightness
Changes the brightness of the tally light on Micro Studio Camera 4K. The default setting is medium.
Display Battery Percentage
Some LP-E6 batteries can tell the camera their charge levels directly via digital serial communication.
If this option is enabled, you can display the battery levels for Micro Studio Camera 4K using a
percentage value instead of graphical bars. However, if you find the percentage display inaccurate, you
can switch back to using graphical bars which measures of the state of charge directly off the battery.
Studio Settings
To adjust the display settings for the LCD, press the 'menu' button and select the headphones icon.
Use the menu navigation buttons to highlight menus and use the 'set' button to confirm your selection.
Camera Number
If you want your Studio Camera to receive tally signals from an ATEM switcher, you'll need to set
the camera number on your camera. This ensures the switcher sends the tally signal to the correct
camera. The camera number can be set to a value of 1-99. Default setting is 1.
Reference Source
Used to select the genlock source. The Studio Camera can lock to program SDI input or external
genlock source. If using an external genlock source, be aware that changing that source will most
likely cause a glitch as the camera locks to the new source.
Reference Timing
Allows you to manually adjust the reference timing on a line or pixel basis.
Studio settings - Blackmagic Studio Camera.
To Next Page
Loading...
