EasyManua.ls Logo

Blackmagicdesign Studio - Page 37

Blackmagicdesign Studio
337 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Developer Information
Group ID Parameter Type Index Minimum Maximum Interpretation
Lens
0
.0 Focus fixed16 0.0 1.0 0.0=near, 1.0=far
.1 Instantaneous autofocus void trigger instantaneous autofocus
.2 Aperture (f-stop) fixed16 -1.0 16.0 Aperture Value (where fnumber = sqrt(2^AV))
.3 Aperture (normalised) fixed16 0.0 1.0 0.0=smallest, 1.0=largest
.4 Aperture (ordinal) int16 0 n Steps through available aperture values from
minimum (0) to maximum (n)
.5 Instantaneous auto
aperture
void trigger instantaneous auto aperture
.6 Optical image stabilisation boolean true=enabled, false=disabled
.7 Set absolute zoom (mm) int16 0 max Move to specified focal length in mm, from
minimum (0) to maximum (max)
.8 Set absolute zoom
(normalised)
fixed16 0.0 1.0 Move to specified normalised focal length:
0.0=wide, 1.0=tele
.9 Set continuous zoom
(speed)
fixed16 -1.0 +1.0 Start/stop zooming at specified rate:
-1.0=zoom wider fast, 0.0=stop, +1.0=zoom
tele fast
Video
1
.0 Video mode int8 [0] = frame rate 24, 25, 30, 50, 60
[1] = M-rate 0=regular, 1=M-rate
[2] =
dimensions
0=NTSC, 1=PAL, 2=720, 3=1080, 4=2k, 5=2k
DCI, 6=UHD
[3] = interlaced 0=progressive, 1=interlaced
[4] = colour
space
0=YUV
.1 Sensor Gain int8 1 16 1x, 2x, 4x, 8x, 16x gain
.2 Manual White Balance int16 3200 7500 Colour temperature in K

Table of Contents

Related product manuals