188
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Note: A requirement is that the appropriate data are available on
your navigation CD. If data are not available for certain items, they
will not be displayed as options.
Entering a destination - intersection
If you selected CROSSROADS in the destination input menu, a list of intersections
available for the destination street will be displayed.
1 Use the or button : to scroll through the list until the name of the
required intersection is displayed.
2 Press the OK button ;.
✔ The selected destination is displayed.
3 You can now start navigation using the OK button ;.
Plus Point: After you have finished entering the destination and before
starting navigation, you have the option of storing the destination in the
destination memory. For further information, read the section entitled
“Destination memory”.
You can specify route options in order to customise the route to suit your partic-
ular requirements, e.g. excluding motorways. For further information, read the
section entitled “Defining route options” in this chapter.
Entering a destination - house number
If you selected the HOUSE NO. menu item, the text input line will be displayed so
that you can enter the house number.
1 Enter the house number using the text input line.
2 Switch to the list and select the range containing the destination house
number.
3 Press the OK button ;.
✔ The selected destination is displayed.
NAV
N1
STREET
SELECT
CONTINUE
CROSSROADS
HOUSE NO.
/
/
/
/
/
/
NAV
N1
STREET
SELECT
CONTINUE
CROSSROADS
HOUSE NO.
/
/
/
/
/
/
To Next Page
Loading...
