201
ESPAÑOL
PORTUGUÊS
ENGLISH
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
If you want to close the selection menu,
1 press the OK button ;.
✔ If no navigation session is active, the audio source will be displayed again.
If navigation is active, you will be taken to the navigation session.
Note: If you change the route options whilst a navigation session is
active, the route will be recalculated. The specified route options
remain active until they are changed again.
Displaying the route list
You can display the route list that was calculated by the navigation system. The
route list is updated during the journey, and the route sections that you have not
yet driven down are displayed.
1 Keep the
button < pressed for longer than two seconds during the
navigation session.
✔ The calculated route list is displayed.
2 You can “page” through the list using the or button :.
If you want to close the list,
1 press the ESC button 8.
✔ The navigation menu reappears.
Traffic announcements during navigation
You can switch traffic announcement standby during navigation on/off.
1 Press the TRAF button @.
✔ The TA function is activated / deactivated. If you activated the TA func-
tion, the symbol appears in the display.
FM
1
EUROPE
NAV
T
M
C
To Next Page
Loading...
