214
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Scanning all tracks on a CD (SCAN)
If you want to briefly play all tracks on a CD, proceed as follows:
1 Keep the OK button ; pressed for longer than two seconds.
✔ All the tracks on the CD are briefly played in ascending order. The scan-
ning time is 10 seconds.
To cancel the SCAN function,
1 press the ESC button 8. The SCAN function is automatically stopped
when the MIX function is activated.
Repeating tracks (REPEAT)
To repeat a track, activate the repeat function.
1 Select the required track,
2 press the 5 RPT button >.
✔ The track is repeated until the repeat function is cancelled. RPT appears
in the display.
If you want to cancel the repeat function,
1 press the 5 RPT button > again.
REPEAT TRCK
O2:33
L
D
R
P
T
OO:O9
L
D
TO2/
1O SCAN
To Next Page
Loading...
