Blaupunkt TravelPilot DX-R52 - Overview of Navigation Functions

165
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
ESPAÑOL
PORTUGUÊS
ENGLISH
Overview of navigation functions
Press the NAV button 7 once in order to
switch from the radio or CD-changer (op-
tional) audio sources to the main naviga-
tion menu. The last destination in the cur-
rent navigation memory bank is displayed
for seven seconds.
Wait seven seconds or press the ESC but-
ton 8.
NAV
N1
DESTN TYPE...
SPEC DESTN
CITY
SELECT
/
/
/
/
/
/
Use the or button : to select the CITY
entry and press the OK button ;.
NAV
N1NAVI
LAST DESTN
BERLIN, UNT
ER DEN LIN
DEN
NAV
N1
CITY
ENTER
BER
/
/
/
/
/
/
NAV
N1
CITY...
LIST
BERLIN
/
/
/
/
/
/
Use the or button : to select the first
letter of the required place in the text input
line. Move the input cursor one position to
the right using the
button :.
Use the or button : to select the sub-
sequent letters. To simplify text input, only
the letters that can logically follow on from
the first letter will be available for selection
(intelligent text input line).
As soon as the TravelPilot recognises that
the entry matches a place name stored on
the CD, it completes the name automati-
cally.
In the majority of cases, only a few letters
are required in order to enter the required
place name.
If the name of the place you are looking for
appears in the text input line, press the OK
button ;.
The selected place name is then displayed
in the list of destination places.
If you want to select a different place name
from the list of destination places, you can
scroll through the list using the
or but-
ton :.
When the place name that you are looking
for appears, press the OK button ;.
If the selected place appears several times,
you will need to specify the place name
more precisely in an additional list. Use the
or button : to scroll through the list
until the required place is displayed, and
press the OK button ;.