EasyManua.ls Logo

Blaupunkt TravelPilot DX-R52 - Navigation; How Navigation Works; Inserting the Navigation CD

Blaupunkt TravelPilot DX-R52
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
181
ESPAÑOL
PORTUGUÊS
ENGLISH
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Navigation
The TravelPilot’s navigation system helps you find your way to destinations quickly
and safely without first having to spend time studying a roadmap. When naviga-
tion is active, you will be guided by the device’s voice output feature. The sys-
tem will warn you in good time about approaching turning-off points. In addition,
the display contains visual driving recommendations, the current distance to
your destination, and the estimated time of arrival at your destination.
Road safety has absolute priority. Please be aware that the current
way in which traffic is being directed always has priority over the
driving recommendations made by the navigation system.
How navigation works
The current vehicle position is determined with the aid of the electronic odome-
ter, the gyro and a signal transmitted by GPS (Global Positioning System) satel-
lites. The navigation system compares the data with the map stored on the nav-
igation CD and uses this information to calculate your position and the routes
used for navigation.
Inserting the navigation CD
1 Press the button 9 to open the control panel.
The control panel opens out towards you and any CD that is already
inserted is then ejected.
2 If a CD is ejected, remove it and then carefully insert the navigation CD
with the printed side uppermost into the device’s CD compartment. Push
the CD until you feel some resistance. From this point onwards, the CD
will be drawn in automatically.
The software is loaded from the CD. The progress is indicated in the
display.

Table of Contents

Related product manuals