220
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Steering wheel remote control
The RC10 steering wheel remote control allows you to safely and conveniently
access some of the TravelPilot’s primary functions from your steering wheel.
The
/ , / and OK buttons on the remote control have the same functions
as they do on the TravelPilot.
Selecting an audio source
You can use the RC10 remote control to switch between the audio sources.
1 Briefly press the SRC button on the remote control.
✔ The next audio source that is ready to play will be selected.
Activating navigation
To access the navigation system using the RC10 remote control,
1 press and hold the SRC button on the remote control until the unit switches
to navigation mode.
Entering a destination using the steering wheel remote control
You can use the arrow buttons and the OK button on the steering wheel remote
control to enter a destination in the same way as you would on the unit.
Adjusting the volume
To adjust the volume using the remote control,
1 press the V+ or V- button.
✔ The volume is increased or decreased.
REMOTE CONTROL
To Next Page
Loading...
