Blaupunkt TravelPilot DX-R52 - Setting the Maximum Power-On Volume - ON VOLUME; Setting the Minimum Volume for Navi- Gation Voice Output - NAVI VOLUME

223
ESPAÑOL
PORTUGUÊS
ENGLISH
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Setting the maximum power-on volume - “ON VOLUME”
When the device switches on, it always plays at the volume level that was heard
last. You can limit the power-on volume by setting a maximum value.
1 Press the MENU button 1.
2 Keep pressing the or button : until ON VOLUME appears in the
display.
3 To set the maximum power-on volume, keep pressing the or button
: until the required value is displayed.
✔ To help you configure the setting more easily, the volume will be increased
/ decreased as you make your changes.
4 When you have finished making your changes, press the MENU button
1 or OK ;. If you do not want to apply the changes, press the ESC
button 8.
Setting the minimum volume for navigation voice output -
“NAVI VOLUME”
Voice output by the navigation system is played at the system volume level. You
can set the minimum volume level at which the voice output should be played if
the system volume is very low.
1 Press the MENU button 1.
2 Keep pressing the or button : until NAVI VOLUME appears in the
display.
3 To set the minimum volume level, keep pressing the or button :
until the required value is displayed.
✔ To help you configure the setting more easily, the volume will be increased
/ decreased as you make your changes.
NAV
ON VOLUME
R
D
S
L
D
O3 45
p
m
NAV
ON VOL 2O
R
D
S
L
D
O3 45
p
m
NAV
NAVI VOLUME
R
D
S
L
D
O3 45
p
m