Blaupunkt TravelPilot DX-R52 - Entering a Destination - from the Destination Memory

193
ESPAÑOL
PORTUGUÊS
ENGLISH
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Special destinations - position surrounding area
You can select special destinations relevant to the area around your current
vehicle position.
Plus Point: This is helpful, for instance, if you are looking for the nearest
petrol station.
1 Press the NAV button 7.
✔ The last destination in the current navigation memory bank is displayed
for seven seconds. After the seven seconds have elapsed or after the
ESC button 8 has been pressed, a menu for selecting the destination
type (CITY or SPECial DESTinatioN) is displayed.
2 Select SPECial DESTinatioN.
✔ A list of special destination types is displayed.
Please refer to the list at the start of this section to find out which special desti-
nation types are available in the position surrounding area.
3 Select the required category.
✔ The available destinations are displayed sorted according to their dis-
tance from your vehicle position.
4 Select the required destination.
As soon as you have selected the required special destination and confirmed it,
you can start navigation. For further information, read the section entitled “Nav-
igation”.
Entering a destination - from the destination memory
You can store destinations that you drive to regularly in the destination memory
so that you can access them easily for other navigation sessions. For further
information, read the section entitled “Destination memory”.
The navigation system has four memory banks at its disposal (N1, N2, N3 and
N4). Six destinations can be stored in each memory bank.
NAV
N1
DESTN TYPE...
CITY
SELECT
SPEC DESTN
/
/
/
/
/
/