Blaupunkt TravelPilot DX-R52 - Tuning into a Station

207
ESPAÑOL
PORTUGUÊS
ENGLISH
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Tuning into a station
There are various ways of tuning into a station.
Automatic seek tuning
1 Press the or button :.
✔ The unit tunes into the next receivable station.
Note: You can adjust the sensitivity of station seek tuning. For fur-
ther information, read the section entitled “Setting seek tuning sen-
sitivity” in the “Setup - basic settings” chapter.
Tuning into stations manually
You can also tune into stations manually.
1 Press the
or button :.
✔ The frequency is adjusted in steps.
Note: In FM radio mode, you can only tune into stations manually if
the RDS function is deactivated.
Browsing through broadcasting networks (only FM)
If a radio station provides several programmes, you have the option of browsing
through its so-called “broadcasting network”. To switch to the next station on the
broadcasting network,
1 press the
or button :.
Note: The RDS function must be activated before you can use this
feature.
When using this feature, you will only be able to switch to stations that you have
received once before already. To do so, use the Scan or Travelstore function.