Blaupunkt TravelPilot DX-R52 - Entering a Destination - Street, Intersection and House Number

187
ESPAÑOL
PORTUGUÊS
ENGLISH
INTRODUCTION NAVIGATION RADIO MODE CD MODE SETUPCD CHANGER
Note: A requirement is that the appropriate data are available on the
navigation CD. If data are not available for certain items, they will
not be displayed.
Entering a destination - street, intersection and house number
1 Select the STREET menu item.
2 Enter the street name using the text input line.
3 When the name of the street is displayed, press the OK button ;.
✔ The name of the street is displayed in the list of street names.
Plus Point: To make your search easier, long street names may also be
stored in several ways, e.g. RAABE-WEG, WILHELM- and WILHELM-
RAABE-WEG.
4 Use the
or button : to select the required street name from the list
and press the OK button ;.
Note: If the street name occurs several times in the destination town,
a submenu containing the various town districts will open in which
you can specify the street precisely.
Once you have selected the street, you can choose between the following op-
tions:
– CONTINUE: You have finished entering the destination and can start nav-
igation. For further information, read the section entitled “Navigation”.
– CROSSROADS: You can additionally select an intersection on the select-
ed street in order to define your destination more precisely.
– HOUSE NO.: You can additionally specify a house number or range of
house numbers as your destination.
NAV
N1
STREET
ENTER
LINDEN
UNTER DEN
/
/
/
/
/
/
NAV
N1
STREET...
LIST
LINDEN
UNTER DEN
/
/
/
/
/
/
NAV
N1
STREET
SELECT
CROSSROADS
HOUSE NO.
CONTINUE
/
/
/
/
/
/